I replaced the screen for an iPhone 5S and used the original home button for the device. Now the home button is working, but when you go to set up touchID, it starts the process and then immediately says "TouchID setup failed".
Bu iyi bir soru mu?
İtibar: 77
3
This would probably be some bent pins or dirt in the connector itself.
I would try cleaning and checking the cable which connect this hardware to the motherboard.
Bu yanıt yardımcı oldu mu?
Did all of that. The end of the cable that connects to the motherboard that needs to be covered, is that the fingerprint sensor? And is the back part of that (the part that gets covered) is that a circuit. The only thing I am thinking is I may have scratched that. Everything else looks fine. It's really odd since the actual home button is working, so I am thinking it's not a connection issue.
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 0
Her zaman: 144
