Eşyalarını Tamir Et Topluluk Mağaza

Early 2011 Model: A1278 / 2.3 GHz i5 or 2.7 GHz i7 processor

782 Soru Tümünü görüntüle

Seçenekler

Cannot boot to new SSD

I replaced my existing hard drive with a new Crucial MX100 256GB SSD. Had no problems installing the SSD and installed OS X Yosemite via usb key.

Problem I have is cannot boot to this SSD at all. I tried setting it as the startup disk but it doesn't appear in the list of disks.

But I checked with with Disk Utility and it's mounted. I ran a verify disk and no errors where found. I also erased it and set it to Mac OS Extended (Journaled).

But still cannot boot

Update

Once I create a Gui partition table and reboot in recovery mode, I was able to install to my SSD.

Thanks for all the help :)

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
1 Yorum

Here's a screen shot of what I see in Disk Utility (sorry about the spotlight search bar)

http://i199.photobucket.com/albums/aa19/...

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Should be System Prefs->Startup Disk->Select Yosemite then tap Restart.

Alternately safe boot, or, boot to restore partition (R boot), choose Yosemite from there.

If this answer is acceptable please remember to return and mark it.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

Thanks machead3, but I don't see my new SSD in the list of Startup Disks. I did create a Guid partition in Disk Utility. Here's a screen shot of what I see in Disk Utility (sorry about the spotlight search bar)

http://i199.photobucket.com/albums/aa19/...

tarafından

You may have the SATA cable problem.

tarafından

Yorum Ekle

Yanıtını ekle

habs33 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 837