Eşyalarını Tamir Et Topluluk Mağaza

Samsung I9000 Galaxy S olarak da bilinen A 3G veya Çin piyasasında Samsung I9008 Galaxy S olarak bilinen akıllı telefon, 2010 baharında piyasaya sürüldü.

44 Soru Tümünü görüntüle

Seçenekler

The device is not turning on after screen cracked and broken

Some years ago i have dropped my phone (Galaxy S i9000) to the ground and obviously the glass was cracked.

The problem is that the phone is not turning on!

I have changed the entire display Super AMOLED but the phone not turn on!

It's died and when i use the mainboard externally with the charger (without is not do anything) i feels that is very very hot but the soft touch keys is turning on... no display, no sound and nothing, only overheating a lot...

Any suggestion? :(

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 3

4 Yorum:

Where does the logic board overheat? Trying a new battery will help with further troubleshooting.

tarafından

Ok, i have ordered a new original battery (but i'm sure that the battery it's OK) and i will try with this! thanks for the moment

tarafından

I am not saying it is not okay, but its a guess. The best way of figuring out what is going on with your phone, is to have a good starting point. A new battery will provide this.

tarafından

I have tested a new battery and the problem is the same, the phone warms and the light of soft touch is flickering and random power on:

http://imageshack.com/a/img661/5880/elXt...

I think than is the ARM Process that warm and be very hot, but only if i press the power on button or i plug in usb power....

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

tried a working battery?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

8 Yorum:

it's not the battery! the battery not have problems because is outputting the correct voltage and if is the battery, can this cause motherboard overheating? :(

tarafından

in rare cases it can by either putting out too much or too low, okay so how you tried seeing what part of the board gets hot then see what that chip is and its function?

tarafından

it's really difficult to understand what warms because hotness expands on all board :( i will check more accuratly this evening, thanks!

i would do this repair because i want recover all my data from flash! :(

tarafından

I have tested a new battery and the problem is the same, the phone warms and the light of soft touch is flickering and random power on:

http://imageshack.com/a/img661/5880/elXt...

I think than is the ARM Process that warm and be very hot, but only if i press the power on button or i plug in usb power....

tarafından

I discovered than what warms i thinks is the IC MAX8998... :( How may be broken and how fix it or replace?

Thanks.

tarafından

3 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

Emulator sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 4

Son 30 gün: 17

Her zaman: 3,054