Eşyalarını Tamir Et Topluluk Mağaza

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1500 Soru Tümünü görüntüle

Seçenekler

Power Button Doesn't Click after Housing Replacement

I replaced the back housing on my 3GS, but I can seem to keep the power button from going flush with the housing. It seems to work okay, but doesn't "click" like it used to. Any suggestions?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

3 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

I know this an old thread, but I thought I'd put my solution up for anyone reading this in the future: I ordered a new button, and when I looked compared it with the old button, it was missing a little plastic rectangle on the back. I took it off the old button (it just peeled off), and I put it on the back of the new button. When I screwed it all back together, it clicked, when without this plastic rectangle, it didn't. Hope it helps.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3
Yorum Ekle

Seçenekler

I think taking it apart again and attempting to reseat the button would be your best bet. I can't think of any other safe/easy way to do it.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Seçenekler

Check the Copper Connectors under the Top Half of the Screen

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

Jacob sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 2,901