Eşyalarını Tamir Et Topluluk Mağaza

iPhone'un 5. jenerasyonu. Cihazın onarımı basittir; tornavidalar, kanırtma aletleri ve sabır gerektirir. GSM/CDMA / 16, 32 ya da 64 GB / Siyah ya da Beyaz.

2193 Soru Tümünü görüntüle

Seçenekler

White screen with lines after touching the Silentbutton cable

Hi there,

I had to change my headphonejack. Everything went fine. I could use my headphones again. After a while the silent switch didn't lock right in place. I opened the back and replaced the cable (just touched it with a repair tool) after that the silent switch worked but the screen showed white with many moving lines.

I had this befor and the only solution was to replace the display.

Why is that? I didn't touch the display or the display cables itself?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

I would try disconnecting the battery and then disconnecting and reconnecting the display and digitizer connections to the motherboard. Then reconnect the battery again and power on the phone. Also inspect the digitizer and display cables and check to see if they have any damage and are connected properly to the motherboard. Hope this helps.

Look at step 17 for LCD and digitizer connections: iPhone 4S Screen Replacement

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

tarsonis sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 41