Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3252 Soru Tümünü görüntüle

What is this plastic piece that fell out of my iPhone4?

I'm replacing the midframe from my iPhone 4 and a small plastic piece with a screwhole came out from near the sensor array.

I'm not sure how to put it back because there's no mid-frame guide for the iPhone 4 and I don't see it in any of the sensor or power button guides.

Photos below. Does anyone have an image of this piece laying in the correct position? It just sort of jumped out after I undid the sensor cables (I think).

Images of both sides of the piece below:

Block Image

-

Block Image

-

Block Image

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

This part goes above the ear speaker and over the back side of the flex with the screen light sensors. It is about 1 cm to the left of the forceps tip in this photo. https://d3nevzfk7ii3be.cloudfront.net/ig...

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

orun bhuiyan sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 82