Eşyalarını Tamir Et Topluluk Mağaza

Garments that keep you warm on brisk days and dry on wet days. Repair difficulty ranges from simple tear patching to more complicated baffle repair.

171 Soru Tümünü görüntüle

Seçenekler

replacing cord in hood

Dear ifixit,

I just bought a brand new Patagonia Northwall jacket in paintbrush red. Unfortunately, I don't like that the draw cords in the hood and waist are the same color as the jacket. It's part of the Touch Point system that has an embedded cord lock sewn into each side of the hood and hem. In order to replace the current draw cords with a black or grey drawcord, is there anyway I can achieve this without having to remove the stitching? I don't think anyone has ever requested something like this before. Thanks.

Regards,

larry

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Cord locks like this can be removed by squeezing them to the open (adjust) position and pulling the cord through the lock.

After the lock is removed you can thread a new cord through the channel by either securing the new cord to the old with a safety-pin, or a few wraps of scotch tape (don't make the wraps too think) and working it back around to the other side.

Reverse the removal steps to replace the lock.

If this answer is acceptable please remember to return and mark it accepted.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Thanks. I hope this works.

tarafından

Yorum Ekle

Yanıtını ekle

larry sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 8

Son 30 gün: 45

Her zaman: 5,536