Eşyalarını Tamir Et Topluluk Mağaza

Mid 2010 Model A1278 / 2.4 or 2.66 GHz Core 2 Duo processor

794 Soru Tümünü görüntüle

Seçenekler

Why is my screen black after installing a new HD and RAM

I recently followed the steps for installing a new hard drive (the recommended 500gb drive) as well as new RAM (crucial 8gb, 2-4gb). When trying to power up afterwards, I hear my computer turn and it accepted my install disc but the screen remains black. I did unplug the battery during repair but plugged it back in. I did not notice anything break or go wrong while replacing. I appreciate any thoughts.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Double check the seating of the RAM and the HD cable. 99.044% of the time a reassembly issue is a connector (connection) that turned out to be lose or incomplete. Of course the RAM is 1066 MHz DDR3 SDRAM (PC3-8500).

Have you tried to boot from a different volume? If the HD is not formatted, and there's no OS on it you should at least get a grey screen - to install the OS and format the drive you will need a boot volume of some sort.

Connect an external monitor - if that works normally you have an onboard video chain problem (at lest the CPU/GPU logic board are OK)

If this answer is acceptable please remember to return and mark it accepted.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Thanks for the quick response, I'm not going to have time to mess with it again for a few days but I'll give those things a try.

tarafından

Yorum Ekle

Yanıtını ekle

John sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 872