Model A1311 / Late 2009 / 3.06 or 3.33 GHz Core 2 Duo processor

249 Soru Tümünü görüntüle

thermal señsor cable incompatable

I bought a seagate SSHD for my iMac. Installation was pretty easy until the last steep. The sensor cable is a square, 2 hole female plug but the seagate has a rectangular receptor with 4 pins. No way to connect the two. Is there an adaptor or should I return this SSHD for something else?

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Don't panic!

Ideally, you should use the same manufacture's drive your system has WD for a WD, Seagate for a Seagate etc...

If you want to stick with the Seagate drive you'll need to swap out the sensor cable harness. In this case you'll need the Apple P/N: 922-9216.

Here's one source: Intel iMac 21.5" Hard Drive Temp Sensor

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

jamesdvm sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 125