Ana içeriğe geç

iPod Classic 6th Generation. Model A1238 / 80, 120, or 160 GB hard drive / black or silver metal front

900 Soru Tümünü görüntüle
Soru Kapandı

Upgrade to solid state drive

Hi, I'm running into an issue with my diy upgrade. I bought an mSata drive to put into my iPod classic 7th gen. When I installed it and turned the iPod on, the screen lit up but did nothing else. Then I thought, maybe the adapter didn't work so I found a Super Talent 128gb solid state drive and tried that. Same problem. The screen just lights up. The screen is bright if I don't plug it in to the usb cable but if I do, it's dimmer. I've read that when people do this, it usually starts up with a screen that says the iPod needs to be restored with iTunes but I've gotten nothing but a blank lit screen. Can anyone help me figure out what to do? I'm very close to just putting in my old hard drive and abandoning the idea altogether.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:

Could be the mSATA adapter doesn't work with the iPods.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Make sure that the adapter you got is a 3.3 V operation, not 5V. mSATA drives and iPods use 3.3V main voltage bus. I have successfully done this same upgrade.

-Michael

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 292