Eşyalarını Tamir Et Topluluk Mağaza

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Soru Tümünü görüntüle

Seçenekler

Black layer between glass and LCD

I have just got a LCD separator machine and have had a go on a couple of broken screens, but have been unsuccessful.

The link below is a picture of two iPhone screens which shows that i have cut into the black/tinted film/layer on the LCD with the cutting wire.

  • Is this layer the touch-registrating part of the screen? What is it's function?
  • And what are the best approach when 'slicing through' with the wire to avoid this? Have i just tilted the wire downwards against the LCD when cutting..?
  • Do i pull the wire slightly upwards towards the glass when separating?

Any help greatly appreciated

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
1 Yorum

I'am having the same problem as you oyvindrosmer but since this post dates back to 2015 I was wondering to know if you have found a replacement for this layer?

thanks

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Is this layer the touch-registrating part of the screen? What is it's function?

> the black film on top of the screen is the Polarizing Layer, it's a thin film that gets put on on top of the touch sensor.

And what are the best approach when 'slicing through' with the wire to avoid this? Have i just tilted the wire downwards against the LCD when cutting..?

>You can remove the polarizing film and add a new one as long as you use the OCA method and have all necessary machinery. Using the LOCA method, you have to be very careful and pull the wire evenly and steadily from left to right without too much force.

Do i pull the wire slightly upwards towards the glass when separating?

You shouldn't have to, but most techs will most likely pull up slightly towards the end, sometimes it goes flying.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Can't I use the LCD without this film? Every time I've separated glass, I ended up with half of film on the LCD.

tarafından

Yorum Ekle

Yanıtını ekle

oyvindrosmer sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 21

Her zaman: 2,092