Mid 2010 Model A1278 / 2.4 or 2.66 GHz Core 2 Duo processor

793 Soru Tümünü görüntüle

DC Power Board Removed

I Took The DC Power Board Out Because Its Bad, Then I Put All Back Together Without DC Board. The Unit Does Not Power On ?. Does It Need Board In To Complete Circuit or Did I Screw Something Else Up ??. Unit Worked With A Charged Battery But Power Adapter Added Did Not Light Up

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Frankly, I haven't tried running a system without the DC-In board connected so I can't say for certain if it will work or not.

But lets look at the part its not just translating the power to the logic board alone as it also has some components on it. So it's logical there is some level of load so the SMC can sense if the AC adapter is present or not.

I would recommend you get the needed part and see what happens after you put it in. If you still have problems its possible there is another problem.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

andylax19 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 57