Ana içeriğe geç

Repair information and guides for the Apple iPhone 5c that was announced on September 10, 2013. Model: A1532, A1456

1233 Soru Tümünü görüntüle

I've just got finish replacing my screen

I replaced the screen on my iPhone 5c and all I see is a black screen and white lines going down the left side of my screen.I can still turn my phone on and off but when I turn it off I don't see the "slide to power off" or the Apple logo when I turn it on. I just see white lines. Also, I looked at my digitizer and my LCD cable and they look completely fine. I also hear the snap when im connecting them to the logic board. So, I have no idea what can be wrong with it

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
1 Yorum

Can anyone help me or tell me what they think the problem could be.

tarafından

Yorum Ekle

4 Cevap

Filtre ölçütü:
Seçilen Çözüm

kobe, something like that

Block Image

can be caused by a bad digitizer connector

Block Image

Block Image

like this. Check the ends of the connector. The plastic of the connector has been compressed into the connector, causing it to flare out and preventing from making proper contact.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

It could be a faulty display order a new display and fit it and see it it works.

When you switch the phone on can you still call the phone and it rings?

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Possibly the LCD flex ribbon connector is the problem, check if it's dirty or damaged. Or you'll have to buy a new replacement.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

These guys are right---bad displays are really common. You'll have to rule that out first before looking for board damage which can also cause this.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

kobe sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 124