Ana içeriğe geç

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2521 Soru Tümünü görüntüle

Home button works but logic board doesn't see it

I am looking for what part to replace when the home button works but jumping the two prongs by the lighting port will not activate siri or send phone to home screen. I am getting 1.7volts on one prong but even when I short them and get voltage on the other prong the main board doesn't see it. If I take my phone and open it and short the prongs siri pops up. Just wonderinig if its the cable or main board. It did it with original home button intermittently and replacement. Then one day it just quit altogether. Any help would be great thx

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

if it works when you open the phone and short the two prongs your dock connector is fine. maybe the prongs aren't bent up enough so they don't touch the homebutton flex. or your home button is broken. use a multimeter to test the continuity...

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Did you replace the dock connector that has the two prongs?

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Not yet should be here this week I will post up soon as I get it installed

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

John Parker sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 104