Ana içeriğe geç

I need to replace my DC-in board, but...

PowerBook G4 15.2" 1.67 GHz-128 2GB 100GB SD AEX

I'm pretty sure I need to replace my DC-in board or rather DC&Sound Card, but it seems like there are two different sets of instructions for the removal/installation of the part. One looking way more complicated than the other...which do I use? Or will either one work? My sticker reads PBG4 15.2"/1.67 GHz-128/2GB/100GB/SD/AEX and my model is A1106, but both instructions say they are for the 15" PowerBook G4 with 1.67 processor...

One is here: www.ifixit.com/Guide/Repair/Installing-PowerBook-G4-Aluminum-15-Inch-1-67-GHz-DC-Sound-Card/651/1

The other is here: www.ifixit.com/Guide/Repair/Installing-PowerBook-G4-Aluminum-15-Inch-1-5-1-67-GHz-DC-Sound-Card/354/1

Which one is right? I want to know what I'm getting into before I open my baby up or maybe pay a "professional" to do it.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Go with the first one, the 651. The other is more of a complete tear down and gets into the right side and logic board which you don't need to do to replace the DC-IN port. Just take it slow and follow the steps. This is a do-able repair even for a beginner. I separate the screws into three groups when doing it. The bottom group, the external case group and the internal. Happy operating!

Oh, you might need this: [bağlı ürün eksik veya kapalı: IF154-108]

Bu yanıt yardımcı oldu mu?

Puan 2

2 Yorum:

+ Ralph

tarafından

So this part even though my model is A1106? I didn't know if the different directions are based on the models or if the 651 instructions will work for any PBG4 1.67 GHz. I think I ordered part IF154-073-1 based on my model#.

tarafından

Yorum Ekle

Yanıtını ekle

Jenny sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 3,210