Ana içeriğe geç

Released on June 23, 1996, Model NUS-001, 64-bit gaming console

66 Soru Tümünü görüntüle

Console Powers on, but does not display

Hello guys,

I had bought an N64 a few days ago that was described as broke. Judging by the picture that was displayed in the listing, I thought the seller might have been ignorant of the fact that it won't work without a jumper pak since there wasn't one in it in the picture. So I bought it because it was only $5 and I thought I could repair it pretty easily, as I am the console repairer at a small game shop here in town. I got it and imediately tried it out using a working Majora's Mask cartridge and the wires, expansion pak, and controller from my working N64, but, just as the description said, it powered on but did not display. I checked my cables just to see if they were the problem, but my working n64 was playing the game just fine on the same cables.

I thought that it might have just been dirty, so I went to the store and bought some compressed air and Dawn. I got my game bits out, took it apart and cleaned it thoroughly, letting the water dry for 24 hours before reassembling it. When I reassembled it, it still didn't work. I am out of ideas of what I can do. I am wondering if anyone else had this problem and fixed it. I really don't want to spend $20 on a new mother board for it. I want to fix it for my little cousin who has never played a game in his life. Thanks in advance.

Bu soruyu yanıtlayın Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:

try:

  • Removing the Expansion Pack (original) and putting it back in.
  • blow on the cartridge and on the machine (not recommended).
  • Different games.
  • Different AV cables.
  • Cleaning the connectors on a cartridge with both dry Q-tips and with isopropyl alcohol.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Garrett Ratliff sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 14

Her zaman: 178