The Kenmore 110 Series is an easy to use home Washing machine created by Kenmore.

343 Soru Tümünü görüntüle

Knob for settings won't turn off water

This is an older model and when I turned it on for the first time it flooded the utility room. I turned off the water and checked for any leakage but there was none. I reset and ran a full cycle with no problem. However, when I waited about 15 minutes after the cycle completed, the water started to flow into the machine and the knob wouldn't shut it off no matter what setting I had it on. Do I need a new knob for this? Thank you

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

Yorumlar:

Does it fill with water even when it is turned off?

tarafından

Yep, it looks like from what I read in the online manual for this Kenmoore model that I need Kenmoore appliance repairman here, but thanks for the info. I need a new pressure switch.

tarafından

Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Washwoman, remove your top console and take a look on the left side to check and see if and see if the hose is off the switch. If it i, reconnect it. Check to see if it still overflows. If it does, you most likely will need a need a pressure switch. If you give us your model number, we might be able to get more information on the actual job.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Washwoman sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 76