Eşyalarını Tamir Et Topluluk Mağaza

Model A1318 / 32 or 64 GB capacity

299 Soru Tümünü görüntüle

Seçenekler

iPod Touch 3rd Gen doesn't respond to touch.

Hi there,

I recently replaced the touchscreen & digitizer on my iPod, but now the touch screen doesn't respond.

The iPod itself is working fine ,but it will not respond to touch...

Help here would really be appreciated.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 2
1 Yorum

Thanks a ton fella's; it's working great :D

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

The cable is either loose or damaged. You need to be really careful when you open this iPod, you will likely mess up the digitizer frame so be really careful. I would get another frame just in case you damage it.

If this doesn't help, the digitizer is busted. You will need to replace it. You can find the guide here. The part is in the parts and tools list.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle
En Yararlı Yanıt

Seçenekler

did the touchscreen work after you replaced the digitizer?

it could be the connecotr for the digitizer, same are sometimes pretty weak.

i would open it again and check that conection - you don't have to reassemble it to test the touchscreen - simply connect it and try to use it - if it's well connected but not working - it's most likely faulty

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Yanıtını ekle

wrightandrew58 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 3,231