Eşyalarını Tamir Et Topluluk Mağaza

Model A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5 or 2.8 GHz Core i7 Processor

432 Soru Tümünü görüntüle

Seçenekler

Fans Noise, Error: 4SNS/1/C0000008:TS0P--124

Hi.

I Add A SSD, Using: "OWC Internal SSD DIY Kit For All Apple 21.5" iMac 2011 Models w/ Tools", Then My iMac is Very Noise.

Apple Hardware Test Said This Error.

TG Pro Said: ODD 4350 RPM, CPU 4000 RPM.

Please Help me.

Update (04/20/2015)

Thanks A Lot.

This is the result on Temperature Gauge Pro.

Block Image

Update (04/21/2015)

This is My new status:

Block Image

Update (04/21/2015)

This is my (last) new status. Thank you Mayer! And every one!

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

4 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

I've had to replace the optical drive fan in several of these. Some of the fans can be fixed by simply pushing on the center of the fan to move it back in place.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 5

3 Yorum:

You said "Hi, i push on the fan and the silence return, thanks, very much. But: On TG Pro: "Fan Diagnostics: These fans appear to be not working properly: Optical Disk Drive (ODD)" What can Do?" First restart the machine and run the diagnostics again. It's Apple part # 922-9120 If you get the same failure use this guide: iMac Intel 21.5" EMC 2428 Optical Drive Fan Replacement

tarafından

will this also work for the iMac Intel 27"

tarafından

Luis, sure it will!

tarafından

Yorum Ekle

Seçenekler

JAIME, the problem is most likely related to the sensor of the optical drive fan. Replacing the sensor and/or the fan should resolve this. Try to start under Safe Boot mode. Follow this Apple TN" OS X: What is Safe Boot, Safe Mode?. Download and install this Temperature Gauge Pro. It should help show you what your sensors are telling you.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

2 Yorum:

Thanks A Lot. This is the result on Temperature Gauge Pro (below).

tarafından

Boot my miMac on Safe mode and still is noisy.

tarafından

Yorum Ekle

Seçenekler

Follow what OT has above

Also did you also get this: OWC In-line Digital Thermal Sensor for iMac 2011 Hard Drive Upgrade. You'll need it if you are swapping the old HD for a SSD drive.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

2 Yorum:

Thanks Dan, On what disk i need put this sensor?: HDD (Old Original, WD 500 GB) or SSD (New, Recent Adding: Samsung 850 Pro 256GB).

tarafından

On the hard drive.

tarafından

Yorum Ekle

Seçenekler

Boot my iMac on Safe mode and still is noisy.

Dan, on what disk i need put this sensor: HDD (Old Original, WD 500 GB) or SSD (New, Recent Adding: Samsung 850 Pro 256GB).?

Where can buy this fan or Sensor?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

8 Yorum:

It appears you have other issuers here.

tarafından

Please tell me.

tarafından

Did you open it and find which fan was making noise and push on the center of them to reseat it?

tarafından

You only need the sensor I pointed you to if you swap out the HD for the SSD. Its a link so click on the blue to learn more about it.

tarafından

Looking at your TG Pro output looks like the HD sensor is working so thats not the issue here. Are you sure you plugged in the sensors back (or correctly) when you disconnected the cables from the logic board to add in the 2nd drive cables?

tarafından

3 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

JAIME sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 8

Her zaman: 4,152