Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

A handheld, user-friendly electronic label maker manufactured by Brother.

1 Soru Tümünü görüntüle

My unit wont turn on

I already replaced the ac adapter with a new one and the machine still won't turn on. I don't use the unit with batteries at all as it drains the batteries very quickly.

the screen remains blank. any suggestions?

Update

so i tested it out today with batteries and the unit turned on! Which makes me think something is wrong with the metal prong that attaches to the adapter. I also tested my adapter with my dvd player and it worked. So now I know what the problem is but can this be fixed? It looks fine to me; is not loose or broken.

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1

Yorumlar:

i have the PT-D600 that wont turn on, or do anything at all..

tarafından

Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

noosheen, start by opening it up using these guides. Then use a multimeter and plug your power adapter in. Measure the voltage on the solder points of the jack on the logic board. It is possible that it has broken off, that you have colder solder joints or that the jack itself has failed.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

REFER TO THESE it seems

SOMEONE MAY HAVE DROPPED IT. SOMETHING SEEMS BROKEN.

Brother PT-D200 Troubleshooting

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

I have bought 2 adapters and both do not turn on the machine. I have also put in 6 brand new batteries and still won't turn on.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

I just had this problem too. It worked great last time I used it. Plugged it in this morning and it won't turn on with the adapter. I put in batteries, still won't turn on. Any solution?

tarafından

Yorum Ekle

Yanıtını ekle

noosheen sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 8

Son 30 gün: 52

Her zaman: 4,581