Eşyalarını Tamir Et Topluluk Mağaza

Released alongside the AirPort Extreme base station, this hard drive equipped variant offers 802.11ac speed on a time capsule NAS.

56 Soru Tümünü görüntüle

Seçenekler

Want to know how the Status light wired for Time Capsule A1470

I'd received damaged AirPort Time Capsule A1470. The status light's 3 electrical wires and 3 pin connector were cut. The only "3 wires" are left inside. I wanna know how those wires connected to the logicboard.

Thanks in advance.

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

They connect to the logic board J1700 connector which is just to the right side of the power supply connector. Here's a good picture of the connectors: Step 4 image from this teardown: AirPort Extreme A1521 Teardown which is it twin without the hard drive.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

On my Airport Extreme, the pin closest to the J1700 lable is common to the status LED, the middle pin is to the yellow and the farthest from the J1700 lable is t the green.

tarafından

Yorum Ekle

Yanıtını ekle

Mai Ichijoh sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 299