Ana içeriğe geç

The second generation of the iPad with Wi-Fi, GSM and CDMA models. Some models were refreshed before the iPad 3. Repair is difficult and requires heat and prying.

957 Soru Tümünü görüntüle

screen not coming up when turned on

Hi There, I have an IPAD2 with WIFI and it was working perfectly till about a few days ago, where the screen is black with a very ligh huge of blue in the back (I can see it if the lights are dimmed. I can hear the background and can tell when it is on or off but thats all I am getting from this. Please advice if there is a solution for this. Thank you

Bu soruyu yanıtlayın Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Try giving the ipad a good smack on the back side of it. The way that lcd connection is hooked up it can come loose and hitting it can reseat that connector. Let me know if that helps.

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

If the smacks don't work it will likely need to be opened up and have the lcd cable reseated.

tarafından

Yorum Ekle

You most likely need to replace the LCD. it's not hard to do if you have experience heating and prying screens, but you do need to be careful not to break it or damage any cables during the removal.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

neslire sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 107