iMac 27 mid 2012 Fan blowing at full speed

Question

iMac Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7

Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac13,2

330 Soru Tümünü görüntüle

andreaslindell @andreaslindell

İtibar: 1

Gönderildi: 8 Haz 2015

Seçenekler

iMac 27 mid 2012 Fan blowing at full speed

Ok, the stand of my Imac broke, so I opened up the Imac myself and replaced it with a new stand. After closing the Imac together, the fan blows at full speed. I have not changed any parts.

I tried to find a solution to the problem. Have done SMC reset and PRAM reset a zillion times, this does not solve the issue.

I have opened up the computer again and tried to see if there was any cables to the fan that wasn't set right, also checked cables to the hard drive.

Any solution or idea? Tried to find something about this, but most solutions seems to cover earlier Imac versions.

Best Regards

Andreas

Hi Dan,

Thanks for your response!

Here comes the screenshot!

Best Regards

Andreas

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

Yorum Ekle

2 Cevap

Dan @danj İtibar: 479,1b Self employed contract worker 35 329 971 · Answer 1 · 2015-06-17T14:49:36-07:00

En Yararlı Yanıt

Dan @danj

İtibar: 479,1b

Self employed contract worker

35

329

971

Gönderildi: 17 Haz 2015

Seçenekler

Lets see if we can identify what sensor is giving you trouble by running this app: Temperature Gauge Pro. Post a screen shot for us to see.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 2

9 Yorum:

Added screenshot above! thanks!

andreaslindell tarafından 18 Haz 2015

Did you replace your HD? It appears the drives sensor is not working. This model of iMac requires a special cable adapter when using either a HD or SSD which is not an Apple drive or one that supports the way Apple accesses the drives internal thermal sensor.

Dan tarafından 18 Haz 2015

No haven't changed anything inside but the broken henge/stand. I did actually open it again to see if the cables were loose or not set right, but everything seems to be correct, is it a cable that easily break?

andreaslindell tarafından 19 Haz 2015

Hi Dan,

Here comes a screenshot, it says though that "These sensors appear to be not working properly: Unknown"

Any idea?

Link to screenshot:

http://screenshot.net/3rnpwfw

Thanks!

Andreas

andreaslindell tarafından 18 Haz 2015

What drive do you have in your system? A HD or a SSD, or a Fusion Drive.

Dan tarafından 19 Haz 2015

4 tane daha yorum göster