Ana içeriğe geç

Model A1213 / 8, 16, or 32 GB capacity

216 Soru Tümünü görüntüle

After Digitizer repair does not come on

i just replaced the digitizer on my iPod Touch 1st gen, and the only life i get out of it is when i plug it into the wall the apple logo shows up and then fades out and there is no more life in it. any suggestions?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Well, if it worked before you took it apart, and it fails now - in absence of any real solutions, you may be best advised to retrace your repair steps. means taking it apart again, check every connection and cable, and possibly connecting the old, failed part (digitizer) to see if you can get to a 'working' state similar to before the repair.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Joe sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,244