Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı


Third generation of iPad with Wi-Fi, released on March 16, 2012. Model Number A1416. Repair requires heating and careful prying.

195 Soru Tümünü görüntüle

Some part of screen are unresponsive after digitizer replacement

Broke my front glass so I had it replaced with new digitizer.

Now after the replacement few parts of the touch screen are not responsive while others are fine.

What could this be? Even when the old glass was cracked, everything was still working smoothly.

Bu soruyu yanıtlayın Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:

It is most likely a defective part. Double check the connectors and make sure everything is tight. If any areas of the cable aren't making contact fully this can happen. If the connections are good then the part needs to be warrantied.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

There are really only a couple things this could be: A bad digitizer or the connections not being made. Clean off the digitizer connection cable and clean the connectors with 99% or 91% IPA. Make sure to check the connectors really well for damage. There is something about the iPad 3's connectors that like to break.

As always: use plastic tools and take your time. If you don't see any damage and the screen is still flaky, you know its a bad screen.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Ipadx3 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 130