Epson WF-3520 firmware update failure
When putting the drivers into a new Win7 install, Epson's search-and-destroy printer identifier and installer decided on its own to update firmware; of course, it crashed. Printer is now stuck in partial-start state - when you power it up, Power LED flashes and beeps once or twice as normal, display starts to come up, then it quits.
I have the firmware updater utility that is SUPPOSED to work, and a couple of the Epson service programs, but they will not connect to the printer via USB.
What is the procedure to do a hardware reset on the WF-3520 (panel keys held down, timing...) to get the bootloader in the microcontroller to reset and go to the "Recovery Mode" function where you can install firmware?
Bu iyi bir soru mu?
1 Yorum
Epsons are just all DUDs now. Biggest piece of crap cant connect to wifi cant connect with the usb cable and on a laptop that can it fails to print red or blue! No the Iink is not empty No the Head cleaner does not work I got 10 pages out a brand-new printer and it went Kaput! Piece of crap. Still trying a yr later and as soon as it gets to Firmware update it freezes says the printer isn't there and round n round in circles. It's the 'Fancy new cartridgeless' DUD!
Angry Epson owner tarafından