Ana içeriğe geç

Repair guides and support for electric and gas-powered high-pressure sprayers sometimes referred to as power washers.

38 Soru Tümünü görüntüle

Simoniz pressure washer leaking from gold spring thingy

Hi there I have a pressure washer that's leaking water out of a gold spring thingy I'm not sure what it is or how to fix it any help would be appreciated

Update (10/08/2015)

Block Image

Gold spring thingy

Block Image

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 2
2 Yorum

Can you elaborate? Could you provide us with a manufacturer, model number, or year? What is the "gold springy thingy?"

tarafından

Yorum Ekle

3 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Hi Mike - That gold springy thing is the adjustment spring for the unloader valve. It makes it so water flows even when the trigger isn't in use. This keeps the pump from running dry. Inside the spring is the adjusting bolt. You should be able to tighten and loosen the bolt to adjust the unloader pressure. I would assume these things were done in the factory before shipping to you but possibly you may need to loosen off the nut to stop the leak. Another possibility is an o-ring/nut has cracked where the water is leaking through. All in all this is definitely something that would be covered under warranty.

Sources for further reading:

http://www.ppe-pressure-washer-parts.com...

http://pressurewashr.com/pressure-washer...

http://www.epowerwash.com/wp/archives/63...

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Hi Mike - That gold springy thing is the adjustment spring for the unloader valve. It makes it so water flows even when the trigger isn't in use. This keeps the pump from running dry. Inside the spring is the adjusting bolt. You should be able to tighten and loosen the bolt to adjust the unloader pressure. I would assume these things were done in the factory before shipping to you but possibly you may need to loosen off the nut to stop the leak. Another possibility is an o-ring/nut has cracked where the water is leaking through. All in all this is definitely something that would be covered under warranty.

Sources for further reading:http://pressurewashr.com/pressure-washer...

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Hi, Mike. That's a Great question . This keeps the pump from running dry.It makes it so water flows even when the trigger isn't in use. Even I appreciate with @jamar . Aslo Tnq @jamar for providing your valuable opinion . Thanks to all. Washer Daddy

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

mike sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 5

Son 30 gün: 26

Her zaman: 3,675