Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Repair guides and support for cars and trucks by Mazda Motor Corporation.

240 Soru Tümünü görüntüle
Soru Kapandı

Why my car does not start and dies out?

I have a Mazda protoge 5 that's giving me problems. It all began after I had my serpentine belt changed. It did good, the first week but, Since then my car has been squealing when I start it and now it has been dying out on me. I thought it was my battery so I went and purchased a new one. The radio, lights, and everything in my car still turns on but it does not start up when I attempt to start the car. Does anyone have any suggestions on how to fix the problem or know any web sites that can help with the problem?

Bu soruyu yanıtlayın Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

Yorumlar:

Does your starter solenoid engage?

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:

Hey Quin,

I'm going to make an educated guess here and say you probably have a seized pulley on your alternator or one of the other accessories powered by the serpentine belt. The tensioner pulley could also be seized and causing the squealing and stalling problem.

If you know how, remove your serpentine belt, and manually turn all the pulleys and the tensioner by hand. If any of them are seized due to bad bearings, it will be obvious. Hope that helps.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 49