Eşyalarını Tamir Et Topluluk Mağaza

Apple's line of laptops for professional and power users. To date, the MacBook Pro line includes 13, 14, 15, 16, and 17-inch variants, with major revisions defined by Pre-unibody(Original), unibody, Retina display, Touch Bar, and SOC (system-on-a-chip) designs.

19983 Soru Tümünü görüntüle

Seçenekler

DVD/CD player does not function after replacing hard drive

I installed a greater capacity hard drive on a friends MacBook Pro.

The drive works perfectly, but the CD/DVD player will now recognize nothing--no CDs nor DVDs.

We don't live in the same country at the moment, so I can't reopen the case to look for the problem.

Any ideas as to the cause? I don't think I touched any other connectors, but perhaps I accidentally did.

Thanks

Stan Kossen

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Go to the system profiler to see if the drive is even seen for a possible disconnect. I would reset the SMC and PRAM. How was the system restored on the new drive?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

3 Yorum:

Mr Mayer. Thanks for the response. The system was restored with a clean install of Snow Leopard.

tarafından

HOW did you do the clean install? If in target mode, was the processor a G5 or Intel?

tarafından

I think I misled. I clean installed Leopard before I changed the hard drive. I made a SuperDuper clone of the internal hard drive. Then I booted from the SuperDuper clone, and copied that to the internal hard drive.

It is has an Intel processor. Thanks for your interest and input.

Later I changed the internal HD, and it was then that the DVD no longer functioned.

tarafından

Yorum Ekle

Yanıtını ekle

Stan Kossen sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,772