Eşyalarını Tamir Et Topluluk Mağaza

Released April 2010 / 2.4, 2.53 GHz Core i5 or 2.66 GHz Core i7 Processors

591 Soru Tümünü görüntüle
Soru Kapandı

Seçenekler

MacBook doesn't boot, only black screen and repeats dvd drive noise

Since yesterday, my macbook doesn't boot any more. I haven't done anything with it, just opened it up and the problem was there.

When I press the power button, the screen stays black and it keeps repeating the dvd player noise when it boots (which, you normally only hear once). Then, I can only turn it off again by holding down the power button.

I tried holding down C, Shift and cmd+option+P+R to reset PRAM, but nothing helps.

Any suggestions?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

If you're comfortable with opening it up I would suggest you try that and look for the cmos battery to manually reset the PRAM. Other than that I would start booting it in different disassembly states. Disconnecting, RAM, HDD, ODD, Battery and so on until it does something else than black screening.

If you need any further advice, feel free to ask me again

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

2 Yorum:

I opened it and took out the two sticks of RAM memory and put 'em back in again. Then it booted normally again so I closed it up. Then booted it again and it got stuck yet again.

I repeated getting the RAM out and in and it booted again.

It seems like what triggers the problem is that when the macbook is turned on and open and when I then close the lid and it goes to sleepmode, it can't turn on back on again. The screen then stays black and I have to hold down the power button. Then bootloop problem occurs.

Now, after I took out the RAM and put them back in again, it booted normally and I held down cmd+option+P+R to reset PRAM. So far, this seems to work. I can just boot normally and put it in and out of sleep mode again.

Could it be that resetting the PRAM fixes the sleepmode and then boot problem?

tarafından

Okay, it definitely still has the problem. I left it in sleepmode for while, opened up the lid and the screen stayed black and I could only turn it off with the power button. Then, upon starting, the bootloop occurred again. It seems switching out the RAM sticks doesn't work everytime. Sometimes it gets the bootloop, and the other times it just boots normally. But when that happens, it doesn't take long for the bootloop to happen again after putting it in sleep mode.

What could be the problem here?

tarafından

Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 216