Ana içeriğe geç

The Canon PowerShot G3 is a digital, point-and-shoot camera manufactured by cannon in 2002.

4 Soru Tümünü görüntüle
Soru Kapandı

How do I replace a broken Flash Capacitor?

The camera is working fine except i cannot get the flash to work. After some research, i found that it is most likely the flash capacitor. How would i replace this? I'd much rather not buy a new camera;

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

This is the component that allows the camera's flash function. Before you proceed, be warned: there are a very large number of screws to deal with, you must know how to solder wires and have the necessary equipment, and it is suggested that you have some method of categorizing the screws in order to put them back in their correct places.

Considering the amount of steps required and the space available here, i will place a link to the guide to do this here.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 142