Ana içeriğe geç

A collection of guides and support to help with washer repair.

3468 Soru Tümünü görüntüle

Machine not working , Error dE

Although the lid is closed and the magnet attached to the lid is intact, the door open error message (dE) is displayed and the machine (LG fuzzy logic model no. T6515TDPT01) stops working after taking two /three turns in wash mode. I seek help from you guys to fix the problem. Thanks

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 3
1 Yorum

Check to make sure that the connector coming from the switch is properly seated on the circuit board.

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Might be the magnet, usually the magnet pushes this switch the shows the door is closed. Hard to explain. Do you happen to have pictures?

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

I shall fix a stronger magnet and shall see if it works.

tarafından

Yorum Ekle

Power off the machine and unplug it if you receive the error mid-cycle or at the end of the cycle. After five minutes, restart the machine and try to open the door again.

Wait about a minute for the door to unlock if you paused the machine during a cycle. In this situation, the locked door and appearance of the DE error is merely a safety precaution.

Bu yanıt yardımcı oldu mu?

Puan 1

3 Yorum:

Simple and great solution!

tarafından

I could not get you dear gillrois. plz explain elaborately.

tarafından

Click on the link for troubleshooting LG washer with error code DE. Hope this help Immi.

http://www.ehow.com/how_7850983_troubles...

tarafından

Yorum Ekle

Yanıtını ekle

Immi sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 240