Ana içeriğe geç

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2521 Soru Tümünü görüntüle

iPhone 5 Pentalobe Screws Spinning

I have refurbished an iPhone 5 into a "6 mini" housing. Done a few of these, no problems. Had to change the battery in one as it could of done with a new one, one of the screws wouldn't come out and now it spins (so not stripped) but turns to a certain point then clicks

any suggestions? don't really know what else i can do.

no access to the screw other then a screwdriver.

i've used a magnet to make the screwdriver stronger but it didn't work

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

Try prying up on the screen just slightly as you try turn it out. Sometimes that can push the screw against the edge and get it to come out.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle
En Yararlı Yanıt

Well. The issue is that the threads of the screw are stripped. Inside the device. So, you could try super gluing your driver to the screw end, and seeing if you can pull it out, probably quickly

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

That would just make it worse, thanks though.

tarafından

Yorum Ekle

Yanıtını ekle

James Carter sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 461