Ana içeriğe geç

24" display; Built-in iSight Camera, Microphone, and Speakers; 1920x1200 resolution. Released October 2008, identified by model number A1267.

84 Soru Tümünü görüntüle

Takes several retries for image to stabilize, logic board not at fault

Weeeeird problem.

Recently, when I would turn on the screen, after a brief flash of the video output, it would go dark. Several retries (switch off and back on) later, it will switch on and stay on for as long as there is power. If it switches off either straight from the power source or the OS settings, I have to do the same thing again.

I followed the troubleshooting guide here and ALL the voltages were correct. I checked all boards for anything suspect and found nothing. So I went ahead and ordered a logic board.

I just replaced the board and guess what? The problem is still the same, exactly.

Is there any chance of repairing this screen without spending more cash than buying an equivalent? (logic board was ~$100 + very expensive international shipping).

Thanks

Georgios

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:

I'd try replacing the internal video cable that exits out the back of the display. They are notorious for failing and causing odd video issues like you described.

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

I'm gonna kill myself if that's the case :) Are there any standard cables I can use for this?

tarafından

Yorum Ekle

Yanıtını ekle

Georgios Diamantopoulos sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 80