Ana içeriğe geç

The current line of iPod nanos comprises seven different generations.

1004 Soru Tümünü görüntüle

Stuck in OK to disconnect mode, can't turn on?

I have an IPOD nano and the screen says OK to disconnect with a check mark. When I disconnect it, it seems frozen in this mode and I can't turn it on,off, nothing.

Any answers?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 11
2 Yorum

I have an IPOD nano and the screen says OK to disconnect with a check mark. When I disconnect it, it seems frozen in this mode and I can't turn it on,off, nothing.

tarafından

Yorum Ekle

7 Cevap

Filtre ölçütü:
Seçilen Çözüm

hold down the power and vol down buttons till apple sign appears. Worked for my 6th gen with same issue.

Bu yanıt yardımcı oldu mu?

Puan 21

14 Yorum:

Bee Jay, you got it buddy. I did that and my ipod is back , Thanks

tarafından

thanks , it helped

tarafından

how smart can one be??? not curing cancer however making sweet music!!

tarafından

i did that but still doing the samething

tarafından

It worked! Thanks!

tarafından

9 tane daha yorum göster

Yorum Ekle

Do a reset. I'm not sure which nano you have, but typically a reset involves sliding the hold switch to hold then back again then pressing the center and menu button simultaneously for 6 to 10 seconds. You may need to repeat this a time or two. Also make sure to be touching only the center and menu buttons, not any other part of the control wheel and push the menu button from only the outer portion of the control wheel, not toward the center. Check out this link to the apple support page where you can select your nano, though the process should be the same:

ZELDA

Bu yanıt yardımcı oldu mu?

Puan 15

9 Yorum:

thank you very much... malama pono ... Aloha 'oi From the Islands of HAWAII

tarafından

I was at my wits end trying to solve this major issue. Thanks to your clever advise all is back to normal within minutes. THANK YOU!!!!

tarafından

R Trent.....THANK YOU!! IT WORKED!!

tarafından

It worked Thanks!!

tarafından

tnx it worked

tarafından

4 tane daha yorum göster

Yorum Ekle

Press home and power button

Bu yanıt yardımcı oldu mu?

Puan 5

6 Yorum:

thank you!!

:) :) :) :) :)

tarafından

Does not work for my I pod 160

tarafından

should you keep the i pod in the hold position

tarafından

thank you it worked

tarafından

It worked but it said I have to connect to Itunes to restore.

tarafından

1 tane daha yorum göster

Yorum Ekle

I tried the power & reset button option, the apple logo is visible, after which it goes back to "ok to disconnect" . The local repairer says that it is a hard drive issue. Mine is an iPod black

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

I connected this to iTunes, but the iPod is not being detected to try a reset. I can hear the hard drive spinning all the while. Any help to resolve this will be much appreciated

tarafından

Yorum Ekle

Plug your ipod into itunes.

Click on ipod.

Click Restore.

Wait Patiently

Click Sync

All Done!

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Step 1.- connect ur ipad nano to pc or laptop

Step 2.- install itune software to ur pc

Step 3.- select ur device (file ---> add device

Step 4.- click restore

Step 5.- follow the instructions

Step 6 .- solved ur problem.

100% its wrkd.. by FB: bala sam Chennai...

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

Can someone help with my I pod problem, there's a tick in the middle of the screen, reading ok to disconnect, just can't get it off that

tarafından

Yorum Ekle

i have an ipod quite old and it has a message with tick saying ok to disconnect and it won’t charge i have read others with the same problem but it won’t work please help

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Sandy sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 gün: 13

Son 30 gün: 103

Her zaman: 75,488