Eşyalarını Tamir Et Topluluk Mağaza

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Soru Tümünü görüntüle
Soru Kapandı

Seçenekler

New replacement screen doesn't come on

I have replaced many iphone screens but I have a problem that I have never ran into before. The phone worked fine with the broken screen, but when you install the new screen, it doesn't come on when you power on the phone. But if I turn the phone on with the old lcd and then put the new lcd, it works good, however, if I turn the phone off, it will not come back on, until I put the old lcd back and turn it on that way. Help anyone please?!!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
2 Yorum

Have you tried another new LCD?

tarafından

yes I did, thanks a lot!

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Yes, This could be a fault on the Newly installed LCD. Use a totally different new LCD that you know its working and you will be sorted. Continue using the faulty new LCD and you risk damaging the digitiser port on the board.Be careful.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Thanks a lot!

tarafından

Yorum Ekle

Seçenekler

If the phone was dropped down there is a chance that your phone's motherboard is causing it and only some India guys stay and worry about those kind of problems! otherwise is a faulty LCD ! Just try another one or get it replaced from where you bought it

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

Oh some India guys huh? I think the proper term would be some Indian guys. Anyways, thanks for your "help".

tarafından

Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 88