kernal panic and restrat screen

My issues first started with the gray screen of death. When I start up my computer now I get a restart screen. Currently the is no extra memory or other non factory bare essentials installed. Here is what I have done so far:

- I have done the resets on this machine.

- I cannot connect it remotely holding down the "T" key at start up.

- I have tried starting up using the "C" at start up.

- I have tried starting up using teh "S" at start up and get a kernel panic "holding here" response.

Any ideas?

Any ideas

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Probably a bad hard drive. Did you have a system installation disk in the optical drive when you tried the "C" key? If not put one in and try it. If it works go to Utilities, Disk Utility and see if you can rpair the hard drive. If it does not see the drive then replace it.

Bu yanıt yardımcı oldu mu?

Puan 3

Yorumlar:

Yes I have the original os 9 installation disk as well as os x. I have tried them both. I was trying to connect it to my g5 tower but it causes the same restart screen on the tower.

tarafından

i think it might be the hard drive. I took it out and placed it in an external enclosure. when i plugged it up to the mac i got a restart screen and my pc doesn't acknowledge the drive

tarafından

+

tarafından

Try starting from the system 9 disk without the hard drive in. Then put the RAM back in and try it again.

tarafından

I did that and got a folder with a "?" on it

tarafından

1 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

Wade Williams sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 786