Ana içeriğe geç

This is the 13th generation model of the Pentax Optio WG-2, which first came on the market in 2012.

4 Soru Tümünü görüntüle

New battery does not seem to be working

I recently bought a new battery for my camera but when I put it in the camera, it doesn't turn on. I have taken out the battery and put it back in several times to make sure the polarity markers line up.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

Android Tamir Setleri

Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

Hemen Alışveriş Yapın

Android Tamir Setleri

Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

Hemen Alışveriş Yapın

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

As my dad always said never over look the obvious, that being said do you have the correct battery? These camera batteries all look alike and it can be easy to pick up the wrong one. Now assuming that you have the right battery and it still doesn't work then that means its the camera and not the battery. Make sure that the battery slot is clear of debris on both the top and bottom. Something may be blocking the contacts. Another possibility is the door that holds the battery down could bad or worn away. See out replacement guides on how to replace that. The other issue could be the circuit board. Something could have shorted (something with power gets connected to something that should NOT have power, resulting in something getting fried. You can confirm this to see if there are black marks on the board.) or a component went bad. If either of these are the case then you might as well get a new camera, unless you can solder and find the component that has gone bad, which is rather difficult.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Matthew Bessette sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

Her zaman: 44