Ana içeriğe geç

Repair guides and support for C/K pickup trucks sold by General Motors under the GMC brand, including the GMC Sierra.

77 Soru Tümünü görüntüle

1996 GMC K1500 not starting

So i had my shifter linkage replaced on a friday, on monday my truck started sputtering and lost power on the side of the road. Got it home and started farting around with it trying to figure out whats wrong. So my first attempt it started and ran for 20 minutes, but when i pressed the brake pedal it shut off. Now it will crank, but will not start. All the fuses are good, the fuel pump primes when i turn the key to on, but it won't start anymore.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

1 Yorum:

http://ricksfreeautorepairadvice.com/pas...

Follow this link it will help

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:

Check your Neutral Safety Switch, It may not be plugged in all the way, bad, installed wrong, or damaged when the linkage was replaced.

- It's located on the drivers side of the transmission, the switch is a plastic box attached to the input shaft of the shift linkage.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

specvgini sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 110