Model A1213 / 8, 16, or 32 GB capacity

283 Soru Tümünü görüntüle

Phillips screwdriving not working in screw holes

Has anyone else had this problem? This is my second 1st gen ipod im fixing and I have run into the same problem as last time, the screws holding the logic board in place (ones near the anntena) arn't working with the phillips screwdriver in the opening tools set.

Any solutions to this and is there a way to avoid it in the furture?

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

Mağazamıza Göz Atın

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

You may be using to large a bit and it's not going all the way down into the screw.

Bu yanıt yardımcı oldu mu?

Puan 2

Yorumlar:

Well I am using the screwdriver that comes with the opening tools, so you know the screw size for ipod touch's thats are 1st gen?

tarafından

I have found a solution that works very well for this problem, hit the top of the screwdriving while ontop of the screw about 5 times with a heavy hammer, makes the screwhead bigger and works perfectly with the screwdriver

tarafından

Yorum Ekle

Yanıtını ekle

Peter sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 11

Her zaman: 1,811