İtibar: 1
1
My PowerBook will start up and run fine on a charged battery, but the AC adapter does not light up and will not operate the machine with the battery removed. I tried a new adapter and had the same results. Any ideas? Thanks!
Bu iyi bir soru mu?
İtibar: 20,3b
68
33
18
Sounds like you need a new DC-in component, get it here
Bu yanıt yardımcı oldu mu?
İtibar: 4,6b
31
13
4
yup, DC-IN board is most likely culprit. It is easily damaged (often when the power cord is tripped over while connected to the computer).
Was the connector your original AC adapter deformed or missing its tip?
Bu yanıt yardımcı oldu mu?
İtibar: 1
1
Yes, I've gone through several adapters due to bent and broken tips. Never understood why they couldn't build them with replaceable cords in a similar way that the 120v cord is designed.
Bu yanıt yardımcı oldu mu?
İtibar: 1,6b
17
11
Are you in the habit of putting your laptop in a case with the charger plugged in? Surely you haven't tripped over your cord enough times to ruin "several" adapters...
It's not a good idea to put a computer in a case with anything plugged into it, as it can so easily damage the port or the logic board connections. In this case, as rab and David point out, something inside seems to have been broken.
Bu yanıt yardımcı oldu mu?
A1138 I have the same problem runs on battery but charger won't charge battery, purchased and changed dc board same thing, changed the battery connection to board with a working one, have to charge battery on another computer,,, is there something on the board bad? Computer not seeing charger. Have plenty of chargers
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 0
Her zaman: 1,153
