Eşyalarını Tamir Et Topluluk Mağaza

iPhone'un 5. jenerasyonu. Cihazın onarımı basittir; tornavidalar, kanırtma aletleri ve sabır gerektirir. GSM/CDMA / 16, 32 ya da 64 GB / Siyah ya da Beyaz.

2191 Soru Tümünü görüntüle

Seçenekler

Why is the touch not responding after I removed the glass

Hello,

I am posting to ask why the touch isnt responding after taking the glass off to refurbish the screen, I have cleaned the screen thoroughly and it lights up okay. the touch kind of works up & down on the edges, the very edges. Apart from that its not responding, everything seems to be okay... what could be the issue? (I am talking about once the glass have been removed and youre testing the LCD/touch)

Is it fixable?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
2 Yorum

OK, what did you clean it with?

tarafından

I used 100% cleaning alcohol ..

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Hey Zachary,

hmmm...

My suspicion is that a connection is loose,

not seated right, or disconnected when you

took the screen assembly off.

I'm not sure what else you may have done

in the "refurbishing" process -but if you

accidentally got some of that 100% cleaning

alcohol inside the unit...well, it just wouldn't

play nice with that wonderful Apple tech.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

4 Yorum:

I can connect other screens and they still work... could it be to do with my process? I have done 3 iphone 4/4s screens and they all have the same out come... nice clean display, but the touch not working properly....

tarafından

The Touch displays are layered glass and electronic screens (layered sub-straits) that electronically detect pressure on the screens so if you sloshed too much cleaning solution the sub-straits would act like a candle wick and soak up the cleaning solution into the center of the glass filling up the empty layer where the electronic pressure is detected. Therefore the pressure of your finger cannot now be detected because the cleaning solution has filled the micro-miniture center. Sorry but you can test this by putting in an uncleaned touch screen to see if it works. You might be able to fix the screens if you could put then in a case of desiccant for a day or two.

tarafından

Okay thank you so much for your advice. Honestly you are a life saver. Could it have something to do with me using a razor blade to clean off the glue also? Although I am careful and it worked to clean the iphone 4/4s screens, iphone 5 and above and much more sensitive... what should i do to remove the glue if I cant use a sharp razor or cleaning agent?

tarafından

hello? :/ @oldturkey03

tarafından

Yorum Ekle

Yanıtını ekle

ZsTech sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 105