Ana içeriğe geç

Apple iPhone 5s, 10 Eylül 2013 tarihinde duyuruldu. Bu cihazın tamiri, daha önceki modellerinkiyle benzerdir; tornavida ve plastik açma araçları gerekir. GSM ya da CDMA olarak, 16, 32, 64 GB kapasiteli Gümüş, Altın ve Uzay Grisi renklerinde mevcuttur.

3530 Soru Tümünü görüntüle

Original Touch ID, the cable(ribbon) is broken

Hello, i have a small problem. One day my home button stopped working. I did not try to repair it. The touch ID still was working fine. But now the touch id stopped working aswell. I removed it, and found out that the ribbon is ripped off. Is there any solution to get it working? I know if I buy a new button, the touch ID will stop working.

Thank you,

Erik

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

1 Yorum:

Please let us know if it works.

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:

Sorry to say that there is no way to repair a ripped cable. You can replace the home button by itself but the touch id won't work. If you won't touch id to work you would have to purchase "iPhone 5s Logic Board with Paired Home Button" which iFixit sells in the parts store

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

I guess it does not worth it. Which part i should re-solder to a new button? (from the little board) I will order 2 buttons, maybe I can fix it by that.

tarafından

Not sure what you mean. Can you rephrase the question?

tarafından

Yorum Ekle

You CAN resolder it, however it is going to be very difficult. There are people offering this repair in China. Basically you need to attach the broken cable firmly together, then peel off the insulation film above and bond the traces with thin wire.

Bu yanıt yardımcı oldu mu?

Puan 0

4 Yorum:

so it is not impossible. I ordered 2 buttons, 5$ each. I will give it try. So i should try to resolder the wire, not a few components under that siliconish jelly?

tarafından

There is a chip under that jelly, you need that one as well.

tarafından

just the chip is not enough?

tarafından

No, from what I know, both the cable chip and the main chip under the button are required. iPhone 6 even uses single chip design, everything is integrated into the button chip.

tarafından

Yorum Ekle

Yanıtını ekle

ezsurzsan sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 166