Ana içeriğe geç

Repair information and guides for the iPhone 6S Plus that was released on September 25, 2015. Model A1687, A1634

1041 Soru Tümünü görüntüle

iPhone 6 Plus replaced loudspeaker stop working after update to iOS 9.

iPhone 6 Plus replaced loudspeaker stop working after update to iOS 9.3.4.

New loudspeaker from iFixit. After replacement speaker works perfecty. FaceTime calling, music, etc. And IPhone runs on iOS 9.3.3. But after update to IOS 9.3.4 speaker stopped working. Several rebooting and total content and setting erase didn't help.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

I can't think of a reason why a speaker replacement would affect an iOS update. I would think of it as a coincidence and move on to other causes. The first cause would be the speaker isn't lined up quite right. Tear the phone down and make sure its tucked in properly and that all screws are in place.

Actually...I suppose a missing screw that provides a ground point could interfere with an iOS update.....

Tear the phone down, make sure everything is where its supposed to be. If it is, try a new speaker then report back.

Bu yanıt yardımcı oldu mu?

Puan 0

3 Yorum:

I'll try to do it. But why speaker work and suddenly stop working?

tarafından

In a perfect world, it wouldn't. In the real world, those things are mass produced in factories with next to no quality control. It sucks but it happens.

tarafından

Hey. I did tear phone down and check all screw. And speaker started to play but for one minute. And then again silence. I'll try to got another one and try it again.

tarafından

Yorum Ekle

Yanıtını ekle

macintosh712 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 64