Ana içeriğe geç

iPhone Screen Replacement Pins Sparked

Hello! I was repairing an iPhone 6S when the cable ribbon accidentally touched a different pin on the logic board, then the cables sparked. The phone still works fine with the old screen. Do I proceed with the new screen, or get a replacement?

Bu soruyu yanıtlayın Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

iPhone Pil Tamir Setleri

Only $29.99

Buy Now

iPhone Pil Tamir Setleri

Only $29.99

Buy Now

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Make sure the battery is disconnected when doing any repair. If it is still connected it can cause a short in the logic and could potentially damage it. Also using ESD protection will help prevent any static damage. I would proceed with the repair but the spark could have shorted something in the screen or the phone.

Bu yanıt yardımcı oldu mu?

Puan 2


Sometimes I wonder if these ifixit guides don't tell you to unplug the battery right after opening the phone.


Yorum Ekle

Yanıtını ekle

Jason De sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 4

Her zaman: 224