Ana içeriğe geç

Nintendo's first 3DS handheld device released February 2011, identified by model number CTR-001.

451 Soru Tümünü görüntüle

My 3DS screen calibration is off

Hello, I own a 3DS and I have noticed for a while that there was minor calibration defects. Since it was minor (a small patch on the touchscreen that didn't respond) I ignored it. I have noticed since then that the stylus also wouldn't match up exactly to the place I tapped, and so it began to be a bit of a problem. I have tried recalibration in the settings but it doesn't seem to be picking up my taps. I really don't want to get another one because there's a program that shut down in future manufactured 3DS's called Flipnote Studio (animation software) and I was lucky enough to get a copy before it got shut down. Please help as soon as you can

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

Best bet would be to replace the touch screen since the calibration setting isn't working for you. It's not a terribly difficult replacement but will take a little bit of time and patience. Order a new touch screen off eBay and then follow this guide: Nintendo 3DS Touchscreen Replacement. Good luck!

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Klay K sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 19

Her zaman: 1,976