Model A1502 / 2.4, 2.6, or 2.8 GHz dual-core Intel processor / Released October 2013

368 Soru Tümünü görüntüle

Screen Flickering, after display change

I have replaced my MacBook retina Display with a brand new one, but then the screen flickers with colors and when I move the mouse pad it stops and even if I put it on safe mode the display works very fine. What could be the problem and how can I solve it.

Bu soruyu yanıtlayın Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

Yorumlar:

Can you explain why you replaced your display. And are you sure you got the correct one for your system? Give us the P/N you put in so we can check.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:

It appears as if you didn't connect the display wire properly to ur motherboard.

If that is not the case u could try making a time machine back up and reinstalling OS X from recovery

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

@riptide - Talha, Did you see the clue here? It is AOK running is Safe Mode. That would imply the cable was firmly connected. So whats different between Normal & Safe modes?

tarafından

@danj yes you are right I misread his post.

So in safe mode some unnecessary kexts are not loaded. That could be the problem. So either boot without kernel cache or reinstall OS X like I said :)

tarafından

Thats one possibility, but what is the clue here it still could be a hardware issue? Reread the OP's Q and what I asked.

tarafından

@manaaf can you tell us why did you replace the display? was it a problem? and if so what was it?

tarafından

Yorum Ekle

Yanıtını ekle

Naf98 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 98