Released October 2008 / 2.4, 2.53, 2.66, 2.8 or 2.93 GHz Core 2 Duo Processor

439 Soru Tümünü görüntüle

Can not boot with install DVD (SnowLeopard Ver. 10.6.3)

I have an MBP aluminum with windows7 installed. There are no macosx inside. When I put in install DVD computer simply hangs with apple logo and nothing happens. Same if I try to install from external HDD.

I believe that windows where installed with boot camp as partition where OS is located called boot camp. Tried almost everything and nothing helps. Any smart advice???

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Your 10.6 disk is most likely an upgrade disk. Your machine needs to have 10.5 installed before using the Snow Leopard. Boot up from your original system installation disk by inserting the disk and holding down the "C" key, next go to the second page pull down menu to Utilities -> Disk Utility and first see if you can find and repair your original system. How did your hard drivwe get into this state?

Bu yanıt yardımcı oldu mu?

Puan 2

Yorumlar:

works for me +

tarafından

Yorum Ekle

Yanıtını ekle

Mindaugas Jakstas sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 5

Her zaman: 2,062