Ana içeriğe geç

Repair and troubleshooting information for the Suzuki FA50 Moped.

75 Soru Tümünü görüntüle

My moped dies when I am not constantly turning the throttle.

I am new to working on my moped so any help would be appreciated, i also have more questions but this one is my main concern.

So i can start the moped no problem its a little rusty but in order to keep it running i have to have the throttle turned a bit, is that normal?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

Sounds like you might need to adjust the idle.

Try adjusting these two screws and see if you can get it to idle without hitting the throttle.

Block Image

Bu yanıt yardımcı oldu mu?

Puan 3
Yorum Ekle
En Yararlı Yanıt

Chase as Randy C. suggested try the idle mixture screws first, if that does not do the trick, the carburetor will probably have to come apart and be clean/rebuild.

I hope this helped you out, if so let me know by pressing the helpful button.

Bu yanıt yardımcı oldu mu?

Puan 4

1 Yorum:

Also check that the gasket is sealing(no vacuum leak)base of carb. to intake on cylinder,

tarafından

Yorum Ekle

Yanıtını ekle

chase sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 9

Son 30 gün: 33

Her zaman: 7,029