Model A1312 / Mid 2010 / 3.2 GHz Core i3 or 2.8 & 3.6 GHz Core i5 or 2.93 GHz Core i7, ID iMac11,3

293 Soru Tümünü görüntüle

need surface mount part for video connector

Yes the title says it all , we were taking the monitor off of a 27" (and when i say we i mean a co-op) and forgot to unplug the video cable from the main board, the surface mount female connector got pretty messed up . we could band-aid it but we need to take the cover on and off to do testing on different hdd's . My question is does anybody know if that connector is used on different model imac's ? and if you have a bad main board that I could harvest the connector off of let me know russ.vagt@hgst.com

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

First of all, why on earth are you doing your HDD testing on an iMac. There are USB adapters, enclosures and lots of machines where an HDD swap is easier. As for the connector i would "McGyver" something. Such as soldering the wires for instance.

Good luck!

Bu yanıt yardımcı oldu mu?

Puan 3

Yorumlar:

This is my recommendation--I use mine frequently. +

http://eshop.macsales.com/item/Newer%20T...

tarafından

Yorum Ekle

Yanıtını ekle

russ sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 609